/THREE:

the COATING range

/THREE: CERAMIC SEALANT

/THREE: Ceramic Sealant is a highly sophisticated formulation of the very latest in SIO2 (Silicon Dioxide) raw materials to provide a hydrophobic glossy and super slick protective coating to your car's paint. Developed as a standalone sealant or as a topper to ceramic coatings, /THREE: CS protects your vehicle not only from the environmental elements but it's slick finish minimises dirt retention making routine washes easier whilst at the same time reducing the potential of wash marring.  

 

/THREE: Ceramic Sealant's protective performance can last for up to 5 months in an easy to use trigger spray format. It's hydrophobic nature has been tuned to remove as much water from the surface as possible, reducing the potential of watermarks and increasing the self-cleaning characteristics. With a deep glass like gloss, it is the perfect tool for enthusiasts and professionals looking for quality protection with concours looks.

 

Features and Specifications:
  - Premium Quality
  - Ceramic coating compatible
  - Tuned hydrophobic performance
  - Self-cleaning properties
  - Reduces surface tension

  - Extreme gloss and slickness
  - Up to 5 months protection (2 Coats)

 

available Sizes:

500 ml

1000 ml

how to use

1. SHAKE WELL BEFORE USE. USING A PREMIUM MICROFIBRE APPLI​CATOR PAD, PRIME THE PAD WITH 3 TO 4 SPRAYS.

2. WORKING 1 PANEL AT A TIME, SPRAY 1 TO 2 SPRAYS ON THE PANEL AND SPREAD WITH THE APPLICATOR. ENSURE COMPLETE EVEN COVERAGE.

3. ALLOW 30-60 SECONDS FOR THE PRODUCT TO BOND. FOR COLDER CLIMATES ALLOW A LITTLE LONGER.

4. WITH A LOW PILE PREMIUM MICROFIBRE TOWEL, LIGHTLY WIPE AND LEVEL THE PRODUCT.

5. WITH A FRESH CLEAN MICROFIBRE CLOTH, BUFF THE REST OFF TO REVEAL AN AMAZING HIGH GLOSS FINISH.

FOR BEST RESULTS

1. decon wash the car using /ZERO: Decon shampoo

2. decontaminate the surface with an iron fallout remover and tar remover.

3. if possible, clay and lightly polish the surface.

4. Use a panel wipe/ipa to remove any surface oils.

5. apply two coats, a minimum of an hour or two apart. allow 24 hours to fully cure before getting wet.

6. avoid applying in direct sunlight or on hot panels.

7. best applied in temperatures above 6 degrees. 

Frequently asked questions

How long does /THREE: CS last for?

from our testing, in closed controlled test conditions and with vehicles out in the field (every day use), we have observed five months of durability with two coats of product. this is without use of any toppers or detail sprays after each wash. 

We must stress that paint preparation, for any last stage protection product is absolutely key for longevity. We recommend doing a full decontamination which involves chemical and mechanical methods to properly prep the paint for any protective product. 

/THREE: Cerberus ceramic coating

/THREE: Cerberus is a highly durable ceramic coating based on the very latest innovations in Nano technology for your vehicles paintwork. Cerberus has been designed to protect your vehicles paintwork from three key causes that can degrade your vehicles visual condition, UV, chemical agents and fine scratches.


Formulated with the very latest and highest grade raw materials, the highly reactive chemistry forms an exceptionally strong bond to the paint surface it is applied to. Cerberus provides an incredible high gloss finish that is extremely hydrophobic and durable ceramic layer guarding against UV rays, heat and corrosion for up to 3 years of protection whilst also promoting outstanding slickness and self cleaning characteristics.

 

/THREE: Cerberus’ highly reflective coated surfaces enables you to maintain your vehicles paintwork much more efficiently, helping to prevent contaminants bonding to its surfaces and thus making the cleaning of your vehicle much easier. Cerberus is the perfect tool for enthusiasts, prosumers and professionals looking for a long lasting ceramic coating that is the best balance of performance, protection and visual looks for your paint.

 

Features and Specifications:

  - Premium Quality
  - Upto 3 Year Coating

  - Water contact angle of 107°
  - Chemical resistance pH 2-11 
  - 3.5H Hardness

  - Wash marring resistance

  - Extreme gloss and slickness

  - Salt Resistance

  - Corrosion Resistance

  - UV and Heat Resistance

 

available Sizes:

30 ml

Frequently asked questions

How long does /THREE: Cerberus last for?

from our testing, in closed controlled test conditions and with vehicles out in the field (every day use), you can get up to 3 years of protection / durability. For this to be realised you must ensure that the coating has been installed as per the instructions (two coats) and is regularly maintained with garage therapy products.

We must stress that paint preparation, for any last stage protection product is absolutely key for longevity. We recommend doing a full decontamination which involves chemical and mechanical methods to properly prep the paint for any protective product.

How do we maintain /THREE: Cerberus?

We recommend Regular washing with /ONE: Car Shampoo at least once or twice a month. The vehicle can then be protected with /TWO: Quick Detailer as a drying aid or as part of a final wipe down. You also have the option of using /TWO: Sigma every two months to boost slickness, hydrophobics and depth of colour. 

For optimal results, we recommend at the point of initial installation using /THREE: chimera Polymeric coating as the final top coat layer. This can then be reapplied every 6-12 months to give a significant boost to hydrophobics, slickness and gloss post a full decontamination with /ZERO: Decon Shampoo and /ZERO: Iron Oxide fallout remover. Remember always use a premium grade panel wipe before application. 

GT-Cerberus Box Alone.jpg
GT-Cerberus.jpg

/THREE: Chimera top coat

/THREE: Chimera is a hydrophobic polymeric coating that can be used as a stand-alone sealant or as a Top Coat to the our ceramic coatings range. Chimera provides a hydrophobic and slick layer that enhances gloss and self cleaning characteristics whilst also increasing chemical protection and water spot resistance.


Chimera is formulated to form a strong film across the surface that feeds and rejuvenates the hydrophobics lost by ceramic coatings over time.

Application:

This product is suitable for painted bodywork surfaces on automotive vehicles, motorbikes, hard plastics parts, taillights and headlights and alloy wheel rims.

 

Do not apply this product to aftermarket paintjobs for up to 2-3 months as a precaution, low quality paintwork, glass, textiles, absorbent materials such as tyres and soft trims

Features and Specifications:

  - Premium Quality
  - Upto 1 Year Protection

  - Extreme gloss and slickness 

  - Extremely hydrophobic.

  - UV Resistance   

  - Salt Resistance

  - Oil repellency

 

available Sizes:

50 ml

GT-Chimera Box Alone.jpg
GT-Chimera Contents.jpg