/TWO:

the PROTECTION range

/TWO: QUICK DETAILER

/TWO: Quick Detailer is a unique blend of car shampoo and nano sealant to give that perfect finishing touch to your car’s paint. Designed to safely remove light surface residue whilst offering incredible lubricity for a safe, glossy and ultra-slick finish.

 

/TWO: Quick Detailer’s performance has been finely tuned to give 1-2 weeks durability. The result is a reflective hydrophobic finish that is compatible with all types of hard surfaces and pre-applied protection. A simple spray and wipe will give the surface a good clean whilst laying down a protective coating that resists UV light, dirt and road film from sticking due to the reduced surface tension. 

 

features and specifications:
- Premium Quality

- Wax, sealant and coating compatible

- Paint, Glass, plastic and rubber compatible

- Tuned hydrophobic performance

- High gloss

- Slick to the touch

- UV Protection

available Sizes:

500 ml

1000 ml

5 Litres

how to use

1. Using a clean premium microfibre cloth, prime the face of the microfibre towel with 2 sprays.

2. Spray directly (15-20cm away) onto the paint, glass or plastic with 1-2 mist sprays, then massage lightly into the paint.

 

3. flip to the unprimed side of the towel and Lightly buff off to reveal an amazing high gloss finish.

FOR BEST RESULTS

1. Wash the car using /One: Wheel Shampoo and /One: Car Shampoo. 

2. Use /TWO: Quick Detailer as a drying aid after a maintenance wash to accelerate the drying process. 

3. Use /TWO: Quick Detailer to clean glass to take advantage of the hydrophobic nano sealant protective qualities and surfactants. 

4. Use clean high quality microfibre towels. Use two separate towels for application and buffing.

5. Clean door sills and jams to take advantage of the high lubricity minimising potential marring.

Frequently asked questions

DOES /TWO: QUICK DETAILER HAVE CLEANING CAPABILITIES?

we BELIEVE A TRUE QUICK DETAILER'S PRIMARY PURPOSE IS TO SAFELY CLEAN THE SURFACE OF CONTAMINATION. WE THEREFORE USED LESSONS LEARNT FROM OUR SHAMPOO DEVELOPMENT AND INFUSED SOME CLEANING AGENTS WITHIN THE QUICK DETAILER TO ACHIEVE THIS FUNCTION. THE RESULT IS A HIGHLY LUBRICATED, SAFE QUICK DETAILER THAT EFFECTIVELY CLEANS LIGHT CONTAMINATION. 

IN OUR TESTING WE ALSO FOUND THE CLEANING AGENTS AND LUBRICITY TO BE GOOD AT TACKLING BIRD BOMBS. 

IS /TWO: QUICK DETAILER SAFE ON ALL SURFACES?

SHORT ANSWER IS YES! /tWO: QUICK DETAILER HAS BEEN Developed TO BE SAFE ON ALL EXTERIOR SURFACES THAT INCLUDES PLASTICS, GLASS, RUBBER AND PAINT. ONE OF OUR FAVOURITE USES IS TO CLEAN THE GLASS WITH THE QUICK DETAILER TAKING ADVANTAGE OF THE CLEANING AGENTS WHILST LAYING DOWN OUR NANO SEALANT TECHNOLOGY FOR EXCELLENT WATER REPELENCY.

Can /TWO: QUICK DETAILER be use with /TWO: sigma?

YES. /tWO: QUICK DETAILER and /tWO: SIGMA have been developed to work synergistically as part of your maintenance and protection regime within the GT System. Due to their common chemistries they will layer successfully on each other without detrimental impact. 

/TWO: SIGMA

/TWO: SIGMA is a hybrid spray sealant and detailer infused with the very latest Si02 raw materials and nano chemistry to provide outstanding hydrophobics, slickness and gloss. Designed to prolong ceramic coatings and sealants with a strong focus on enhancing visual depth, slickness and water repellency.

 

/TWO: Sigma’s performance has been tuned to give 6 weeks durability in a single application and can be layered to enhance and prolong protective qualities and slickness. The result is a highly reflective hydrophobic finish that is compatible with all painted surfaces and works in synergy with existing protective base layers and our /THREE: Coating range.

/TWO: Sigma is our vision of the definitive finishing spray for maintaining a high-quality finish for enthusiasts and professionals alike.

 

features and specifications:

  - Premium Quality
  - Wax, sealant and coating compatible
  - Extends and enhances existing protection

  - Can be used as standalone protection or a topper
  - Highly Hydrophobic
  - Extreme Gloss and Slickness

available Sizes:

500 ml

1000 ml

5 Litres

how to use

1. Shake Well. Using a clean premium microfibre cloth, prime the face of the towel with 2 to 3 sprays.

2. Spray directly on the paint with 1-2 full sprays and spread lightly  into the paint. At this stage do not buff off.

3. Allow to cure for 30-60 seconds.

4. Flip to the unprimed side of the microfibre cloth and lightly buff off /TWO: SIGMA to reveal an incredible deep high gloss finish.

FOR BEST RESULTS

1. Wash the car using /One: Wheel Shampoo and /One: Car Shampoo. if the paint is contaminated, WASH WITH /ZERO: Decon Shampoo.
 
2. Use two clean high quality microfibre towels with one for application and the other for buffing.

3. APPLY /TWO: SIGMA as a topper to
/THREE: CS for enhanced slickness, gloss and hydrophobics.

4. Apply two coats of
/TWO: SIGMA for increased durability and water repellency.

5. avoid applying on hot panel surfaces.

Frequently asked questions

WHY /TWO: SIGMA over your quick detailer?

SIGMA does not contain cleaning agents and its focus is on hydrophobics, visual depth and slickness. it was created as a more stout form of protection in comparison to our qd but with ease of use in mind. sigma's main purpose is to be the definitive finishing touch to your cars last step protection products, boosting their longevity whilst adding visual depth and slickness.

WHat are the differences between /TWO: SIGMA and /TWO: quick detailer?

- our quick detailer can be applied on all exterior surfaces whilst sigma cannot.

- quick detailer is more of a sheeter and sigma has much strong hydrophobic behaviour.

- sigma can last for 6 weeks on a single application whilst the qd only lasts for 2 weeks.

- quick detailer contains cleaning agents, sigma does not

- sigma contains sio2 and the qd does not.

IS /TWO: SIGMA SAFE ON ALL SURFACES?

SIGMA has been designed to be apply on painted surfaces. Whilst it can be applied to certain plastics, due to the various manufacturers quality variability we suggest to test on a small area before applying. We do not recommend applying SIGMA on your Windscreen however side windows are ok.

How much time between multiple coats of /TWO: SIGMA?

SIGMA is quick curing product. We recommend waiting 20-30 minutes after your initial application for a second coat. 

Sigma Insta 1.JPG
TT Sigma 1L no logo.jpg

/TWO: Leather protect

/TWO: Leather Protect is an advanced leather protection formula that prevents surface damage caused by high levels of friction.

 

/TWO: Leather Protect’s durable nature inhibits discolouration and dye transfer caused by other fabrics. It also protects the leather against liquid spillage and harmful UV rays for up to 6 months.

/TWO:  Leather Protect has been formulated and manufactured by Colourlock (LEDERZENTRUM GmbH) to Garage Therapy’s specifications. This collaboration represents decades of research, development and expertise in leather care.

features and specifications:

 - Premium quality.

 - Protects against abrasion damage and discolouration on pigmented smooth leather.

 - Protects against UV Rays.

 - Protects against spillages.

 - Compatible with Pigmented, PU, Pull UP and Semi-Aniline Leather.

available Sizes:

200 ml

how to use

1. Shake well before use. Prior to extensive use, test compatibility on an inconspicuous area of the surface.

2. Ensure that the leather surface has been cleaned with /ONE: Leather Cleaner prior to application.

3. Apply /TWO: Leather Protect to a high quality microfibre towel or applicator. 

4. Wipe over the leather surface to ensure even coverage and allow to dry. Do not buff immediately after application. 

FOR BEST RESULTS

1. Clean regularly with the Garage Therapy Leather Cleaning Brush and /ONE: Leather Cleaner.

2. Use high quality microfibre towels to apply and wipe away excess when dried.

3. Apply /TWO: Leather Protect every 3 months for high traffic areas and every 6 months for other leather surfaces. 

Steering wheel close up 50-50.jpg
TWO_Leather Protect TT.jpg