/Zero:

the cleanse range

/Zero: IRON OXIDE V2

/ZERO: iRON oXIDE v2 is an extremely powerful ferrous metal fallout remover that has been infused with robust deep cleansing surfactants from our /ZERO: Decon Shampoo. It has been formulated to offer effective removal of iron oxide particles, plus other non-organic pollutants commonly found on your vehicles' paintwork and alloy wheels. /ZERO: Iron Oxide’s high performance chemical makeup reacts quickly to rust particles and brake dust on contact, turning a deep purple colour indicating that it is attacking and cleansing the fallout.

/ZERO: iRON oXIDE v2'S viscosity has been carefully dialled-in to offer a good balance of chemical adherence  and coverage to ensure the ferrous particles are engulfed, dissolved and degreased leaving the surface cleansed. /ZERO: Iron Oxide fallout remover is the perfect tool for any good fallout decontamination process for your vehicle.

Features and Specification:
- Premium quality. 
- 360 DEGREE CLEANING FOR FERROUS AND NON FERROUS CONTAMINANTS. 
- High lubrication and foaming action.
- highly concentrated.

available Sizes:

500 ml

1000 ml

5L

Changes in Version 2:

- Slightly less viscous.

- Slightly less foam.

- Higher concentration of TGA.

- More powerful iron oxide removal.

how to use

1. Shake well before use and wear appropriate safety equipment such as gloves and protective eye-wear. Do not use on hot panels or components, do not use in direct sunlight and work in a well ventilated area. 

2. Spray onto the painted surfaces, ensuring complete and uniform coverage.

3. Allow to dwell on the surface for 4-5 minutes. The iron oxide particles, if present, will dissolve and turn a deep purple colour. Do not allow the product to dry on the surface. 

4. Rinse the treated areas thoroughly, removing all residue.

5. Repeat if necessary.

FOR BEST RESULTS

1. Pressure wash the vehicle thoroughly and wash the vehicle using /ZERO: Decon Shampoo.

2. For heavily contaminated areas on the vehicle's paint, agitate the product using a premium microfibre. 

3. For heavily contaminated wheels, agitate with a soft bristled brush or wheel MITT. 

Frequently asked questions

cAN /ZERO: IRON OXIDE BE USED ON MY PAINT AS WELL AS ALLOYS?

yES, IT HAS BEEN FORMULATED TO BE A COMPLETE SOLUTION FOR FERROUS DECONTAMINATION AND OTHER POLLUTANTS FOR PAINT AND ALLOY WHEELS. WITH THE INCLUSION OF OUR DECON SHAMPOO ADDITIVES, IT WILL AID THE CLEANING PROCESS BEYOND JUST IRON OXIDE PARTICLES. 

I have seen /ZERO: Iron Oxide being spread over the paint, will this cause swirls?

/ZERO: Iron Oxide contains a massive amount of lubricating agents due to the inclusion of /ZERO: decon shampoo surfactants in the formula. As the solution is slightly viscous you can spread the active agents over the paint surfaces for even coverage. in addition to the iron fallout reaction, you will active the decon shampoo surfactants to clean other contaminant on the surface. 

WHERE does it fit in my maintenance detailing process?

We recommend treating your paint of ferrous fallout and other pollutants after you have done a decontamination wash with /zero: Decon Shampoo. This is to ensure that Iron Oxide is attacking the bonded contaminants not the general dirt accumulated on the surface from driving. 

GT - ZERO Iron Oxide in use 3.jpg
GT  - Zero Iron Oxide Paint Reaction.jpg
GT - ZERO Iron Oxide in use 2.jpg